Ea4500; Top View - Cisco EA-Series User Manual

Linksys EA-Series

EA4500

Top view

Indicator light—Stays on steadily while power is connected and
•
following a successful Wi-Fi Protected Setup connection Pulses slowly
during bootup, during firmware upgrades, and during a Wi-Fi Protected
Setup connection Flashes quickly when there is a Wi-Fi Protected Setup
error
Back view
Ethernet ports
Ethernet ports—Connect Ethernet cables (also called network cables)
•
to these Gigabit (10/100/1000) ports, color coded blue, and to other
wired Ethernet network devices on your network
Indicator light
Internet port—Connect an Ethernet cable (also called a network or
•
Internet cable) to this port, color coded yellow, and to your modem
Wi-Fi Protected Setup™ button—Press this button to easily configure
•
wireless security on Wi-Fi Protected Setup-enabled network devices
USB port—To easily share disk storage with other users on your network
•
or on the Internet, connect a USB drive to this port
Reset button—Press and hold this button for 5-15 seconds (until the
•
port lights flash at the same time) to reset the router to its factory
defaults You can also restore the defaults using Cisco Connect Cloud
Power port—Connect the included AC power adapter to this port
•
CAUTIOn
Use only the adapter that came with your router
Power button—Press | (on) to turn on the router
•
Product Overview
Internet port Power port
Wi-Fi Protected Setup button Reset button
USB port
2