Product Overview; Ea2700/Ea3500; Back View; Bottom View - Cisco EA-Series User Manual

Linksys EA-Series

Product Overview

EA2700/EA3500

Back view

USB port (EA3500 only)
Ethernet ports
Your router's appearance may vary
USB port (EA3500 only)—To easily share disk storage with other users
•
on your network or on the Internet, connect a USB drive to this port
Ethernet ports—Connect Ethernet cables (also called network cables)
•
to these Gigabit (10/100/1000) ports, color coded blue, and to other
wired Ethernet network devices on your network
Internet port—Connect an Ethernet cable (also called a network or
•
Internet cable) to this port, color coded yellow, and to your modem
Wi-Fi Protected Setup™ button—Press this button to easily configure
•
wireless security on Wi-Fi Protected Setup-enabled network devices
Power indicator—Stays on steadily while power is connected and
•
following a successful Wi-Fi Protected Setup connection Flashes slowly
during bootup, during firmware upgrades, and during a Wi-Fi Protected
Setup connection Flashes quickly when there is a Wi-Fi Protected Setup
error
Power port
Internet port Power indicator
Wi-Fi Protected Setup button
Power port—Connect the included AC power adapter to this port
•
CAUTIOn
Use only the adapter that came with your router
Power button—Press | (on) to turn on the router
•

Bottom view

Your router's appearance may vary
Reset button—Press and hold this button for 5-15 seconds (until the
•
port lights flash at the same time) to reset the router to its factory
defaults You can also restore the defaults using Cisco Connect Cloud
Product Overview
1 1