Media Centre Configuration; Insert Cd-Rom; Windows Vista Update; Setup - Cisco Linksys DMA2100 Quick Installation Manual

3�

Media Centre Configuration

NOTE: Follow the steps below in order . You must insert the CD-
ROM and proceed through the setup screens .

Insert CD-ROM

Insert the CD-ROM that came with your
Media Centre Extender, into your Media
Centre computer . Proceed through the
steps displayed on-screen .

Windows Vista Update

If you use a compatible version of
Windows Vista you will be asked to
update your system via Windows Vista
Update . Proceed through the steps
displayed on-screen .

Setup

If your computer has automatically
discovered the Extender, a message will
display, stating that the Extender was
found .
The type of message displayed may vary .
Click on the screen, or select Yes to start
the setup .
If your Extender was not automatically discovered, proceed with the
following steps .
1 .
Open "Media Centre" on the
computer and press the up or down
arrow to select Tasks .
A .
Press the left arrow to select
settings .
B .
Use the up or down arrow to
highlight Extender and then
press the up arrow to highlight
add extender. Click Enter.
Insert CD-ROM Insert CD-ROM
Found Media Extender message Found Media Extender message
Add Extender Add Extender
1