Cisco LINKSYS NAS200 Quick Installation page 12

W.
The network drive(s) are mapped to
your computer.
Click Online Registration to
register the Network Storage
System, or click Exit to exit the
Setup Wizard.
NOTE:
click the network drive to access it.
Congratulations! Setup for this computer is complete.
NOTE:
run the Setup Wizard on those computers.
Additional Information
For warranty, regulatory, user information for consumer products covered
by EU Directive 2002/6/EC on Waste Electric and Electronic Equipment
(WEEE), and specifications, refer to the User Guide on the CD-ROM.
Linksys contact information is available at the end of this document and on
the CD-ROM (or as an insert included in the box).
WEB:
updates to your existing products at www.linksys.eu or
www.linksys.com/international
On your desktop, double-click My Computer. Then double-
To set up other computers to use the Network Storage System,
Visit us online for information on the latest products and
Network Drive Mapped Network Drive Mapped
Installation
1