Cisco NMH Series User Manual page 47

Chapter 7
Up Time The number of minutes the Media Hub has been
running is displayed.
Media Hub Name The name of the Media Hub is
displayed.
Workgroup
The name of the workgroup is displayed.
Change
Click this option to change the name and/or
workgroup.
Change System Name
• Media Hub Name Enter the new name.
• Workgroup Enter the new workgroup name.
Click Submit to save your changes, or click Cancel to
cancel your changes.
IP Address
The local IP address of the Media Hub is
displayed.
Change Click this option to change the network
settings.
IP/DNS Configuration
Enable DHCP If you want to allow your network
•
router to assign a dynamic IP address to the Media
Hub, select this option. (It is enabled by default.)
If you disable the DHCP server feature, then you
configure static network settings:
IP Address Enter the local IP address you want to
•
assign to the Media Hub.
NOTE:
If you change the IP address, you may
have to re-assign the drive letter to the Media
Hub. Run the Setup Wizard on the enclosed
CD-ROM (click Connect Computers), or refer to
Windows Help for instructions on how to assign
a drive letter to the Media Hub.
Media Hub
Advanced Configuration
Subnet Mask Enter the subnet mask of the Media
•
Hub.
• Gateway Enter the IP address of the gateway.
• DNS Server 1 Enter the IP address of the DNS server.
• DNS Server 2 Enter the IP address of the backup DNS
server.
Click Submit to save your changes, or click Cancel to
cancel your changes.
Password The Password protects administrative access to
the Media Hub, including full access to the Configuration
utility and the File Browser. The Password must have
between 1 to 32 characters and use only letters, numbers,
or punctuation (do not use any spaces).
Change
Click this option to change the Password.
Change Password
Current Password
• Enter the current Password.
New Password
• Enter the new Password.
Confirm New Password
•
again to confirm it.
Click Submit to save your change, or click Cancel to
cancel your change.
Guest Password The Guest Password allows access
restricted to the media content of the Media Hub (no
access to the Configuration utility or the File Browser). The
Guest Password must have between 1 to 32 characters
and use only letters, numbers, or punctuation (do not use
any spaces).
Change Click this option to change the Guest Password.
Change Guest Password
Password
• Enter the new password.
Confirm New Password
•
again to confirm it.
Enter the new Password
Enter the new password
43