Cisco NMH Series User Manual page 48

Chapter 7
Click Submit to save your change, or click Cancel to
cancel your change.
System Date The current date and time of the Media
Hub are displayed.
Time Zone
The current time zone of the Media Hub is
displayed.
Change Click this option to assign a different time zone
to the Media Hub.
Change System Date
Current Media Hub Date
•
are displayed.
Time Zone Select the appropriate geographic
•
region, and then select the appropriate city, county, or
community.
Click Submit to save your changes, or click Cancel to
cancel your changes.
Device Language The current language of the LCD is
based on your computer's operating system.
NOTE: This option only applies to the Media
Hub with LCD (NMH400 Series).
Change Click this option to switch the LCD of the Media
Hub to a different language.
Select Language
Select Language Select the appropriate language.
•
Click Submit to save your change, or click Cancel to
cancel your change.
Firmware Update: Latest Firmware Version
available firmware version of the Media Hub is displayed.
Update
Click this option to update the firmware.
NOTE: An active Internet connection is
required.
Media Hub
The current date and time
The latest
Advanced Configuration
Update Firmware
The Media Hub will search for the latest version.
Click Update to begin the firmware update, or click
Cancel to cancel the update.
WARNING: Do not reboot or power off the
Media Hub during the firmware upgrade, which
may take up to 15 minutes.
Restart If you want to reboot the Media Hub, click
Restart.
Reboot Device
Click Yes to reboot the Media Hub, or click No to cancel
the reboot.
44