Set Lcd Brightness; Play Button Set Up; Calibrate Touch Screen; Sleep Timer Set Up - Cisco LINKSYS DMP100 User Manual

Wireless Home Audio

Play button Set Up

This option provides a safeguard from automatically
eliminating the contents of the Now Playing Queue
when pressing the Play
options:
Prompt
When prompt is selected, a reminder message
•
will appear every time the Play
This reminder will verify that you want to replace the
contents of the Now Playing Queue with the item you
selected. You need to press OK to continue or the Back
button to cancel.
Off This is the default setting. When the Play
•
button is selected, the selected item will start playing
immediately and replace the contents of the Now
Playing Queue. Any track that was previously playing
will be stopped.

Calibrate Touch Screen

Use this option to calibrate your touchscreen. Press the
center of the + symbol when it appears on the screen.
When the OK appears on the screen, press the center of
the 5-Way button.
Player/Wireless-N Music Extender
button. The following are the
button is pressed.
Using the Controller with Your Player

Sleep Timer Set Up

The Sleep Timer can be turned OFF or set to start after an
idle period of 30 seconds, 60 seconds, or 2 minutes. Sleep
turns off the display on the screen to conserve battery
power.

Hibernate Set Up

Hibernate can be turned OFF or set to start after an idle
period of 10, 20, or 45 minutes. Hibernate mode conserves
more battery power and is useful for long periods of idle
time.

Set LCD Brightness

Use the scroll on the Controller to adjust the brightness
level of the viewing screen. After a few seconds of idle
time the brightness adjustment slider window will close or
press the Back button to return to the list of settings.
37