Play To; Settings; Source - Cisco LINKSYS DMP100 User Manual

Wireless Home Audio
The Now Playing icon indicates which track in the
queue is currently playing. If you want to immediately
play another track in the queue, select the track on the
touchscreen or press the center of 5-Way button.

Play To

Play To allows you to link and unlink zones. You can play
tracks to an individual player or select Party Mode to
sync up all of your Wireless Home Audio devices. Audio
will playback perfectly in sync on the devices throughout
your home. To enable Party Mode, press Play To All 'Party
Mode'.
A message will appear stating that the linking has been
successful. To unlink the devices, select Play To Local.

Settings

Player/Wireless-N Music Extender
Using the Controller with Your Player
The Settings option contains many configurable options
for your Director. Below are the options that can be
configured:
Source, page 34
•
Wireless Settings, page 35
•
Zones and Libraries, page 35
•
General Settings, page 36
•
Set LCD Brightness, page 37
•
Set Bass/Treble, page 38
•
About, page 38
•

Source

You can connect any external analog audio source to your
Wireless Home Audio network using the RCA input jacks
on the back of your Director or Player and play the music
to all the devices in your home.
This allows you to stream music from sources such as
turntables, stereo systems, DVD players, video cameras,
karaoke systems, and generic MP3 players.
To play external analog audio, ensure that the RCA outputs
are connected from your external device to the RCA inputs
of the Director and perform the following steps:
1. Select Settings from the main menu.
2. Select Source from the Settings menu.
3. Select Analog Line In on the Source screen.
34