Playback Control Functions; Using The Queue; Adding Music To The Queue - Cisco LINKSYS DMP100 User Manual

Wireless Home Audio

Playback Control Functions

Button Function
Volume Control
allows you to adjust the volume for the selected
device. You drag the slider up to increase the
volume or down to lower the volume.
Bass/Treble Adjustment
upper right to bring up the adjustment sliders
for the bass and treble audio settings.
Previous
Press this to play the previous track
in the queue.
Stop Stops the current music selection
(playing or paused music) and moves the first
item played to the top of the queue which is
then highlighted. The Stop button does not
clear the queue.
Play/Pause
This button toggles between
playback and a paused state. If nothing is
playing, pressing this button when music
is selected starts playback of the selected
music.
Next Plays the next song in the queue.
Repeat
Allows you to continuously play the music in the
queue. Once the end of the queue is reached, the track
at the top of the queue will begin playing and playback
will be continuous until you stop music playback. To select
repeat, press the icon to the right of the Playback controls
for the specific zone.
To turn Repeat off, press the button again, so it is no longer
illuminated.

Using the Queue

The Queue contains the track that is currently playing and
any additional tracks that have been added to the queue.
Adding songs to the queue allows you to play songs
continuously without interruption. The songs are played
in the order that they were added to the queue, unless
you select Shuffle. You can also turn on Repeat, which will
Player/Wireless-N Music Extender
The Volume Control slider
Click the icon in the
Playing Your Music with the Cisco Media Software
continuously repeat the tracks that are in the queue. The
Queue tab displays the song title, artist name, and duration
(Time) of the song.
When a track is being played, a Now Playing
appear to the left of the track title. You can double-click
on another song title to play that song instead of the
track that is currently playing and move to that spot in the
queue.

Adding Music to the Queue

Tracks can be added to the queue by double-clicking the
desired track or tracks (use Shift or Ctrl to select multiple
tracks), the music is automatically added to the queue of
the zone you are actively controlling (indicated by the
light blue border around the zone).
If you have multiple devices on your network and want
to add music to the queue for a specific zone, you can
right-click on a track, highlight Add to Zone, and select
the appropriate zone.
NOTE:
current contents of the queue and play the
selected music immediately.
You can also add Favorites to the queue using the same
methods described earlier in this section. If you select a
favorite that has been assigned to a RadioTime station, it
will immediately clear out the queue and replace it with
the station selection. RadioTime stations continuously
play music so there is no queue of selections to play next.
Selecting Play to Zone will clear out the
icon will
18