Network Adapter - Cisco WUSB54AG Quick Installation Manual

Set up the Wireless A/G USB
1

Network Adapter

IMPORTANT: Do not connect the Adapter to Your PC
until instructed to do so or the setup will not work.
A
Insert the Setup Wizard CD-
ROM into your CD-ROM drive. If
the Setup Wizard's Welcome
screen does appear
automatically, click Start and
choose Run. In the field that
appears, enter D:\setup.exe (if
"D" is the letter of your CD-ROM
drive).
B
To install the Adapter, click
Install on the Welcome
screen.
C
After reading the License
Agreement, click Next.
D
On the Wireless Mode screen,
you will need to select which
mode of wireless networking
you'll be using. The first
selection will automatically
select between a Wireless-A
and a Wireless-G networking
mode. The second selection
will only connect to 802.11a
networks. The third selection will
only connect to 802.11g
and/or 802.11b networks.
2
B
D