BIOS Setup
BIOS Setup
▶
VDroop Control
Ths tem s used to select the VDroop control mode.
▶
CPU Vcore/ DRAM Voltage/ PCH 1.05
These tems are used to adjust the voltage of CPU, Memory and chpset.
▶
Current CPU Vcore/ Current DRAM Voltage
These tems show current CPU Vcore/ DRAM voltage. Read-only.
▶
Overclockng Profile
Press <Enter> to enter the sub-menu.
▶
Overclockng Profile 1/ 2/ 3/ 4/ 5/ 6
Press <Enter> to enter the sub-menu. In the sub-menu, these tems are used to save
the current settngs, and you can to load the settngs from the stored profile.
▶
OC Retry Count
When overclockng has faled, settng ths tem as [1, 3] wll allow system to reboot
1/ 3 tmes wth the same overclocked configuraton. If overclockng has faled every
tme, the system wll restore the defaults.
▶
CPU Specficatons
Press <Enter> to enter the sub-menu. The submenu shows the nformaton of nstalled
CPU.
▶
CPU Technology Support
Press <Enter> to enter the sub-menu. The sub-menu shows the nstalled CPU tech-
nologes. Read only.
▶
MEMORY-Z
Press <Enter> to enter the sub-menu.
▶
DIMM1~4 Memory SPD
Press <Enter> to enter the sub-menu. The sub-menu dsplays the nformatons of
nstalled memory.
3-10