Connect The Printserver - Linksys WPS54GU2 Quick Installation Manual

1

Connect the PrintServer

Before starting the physical installation,
note the PrintServer's Default Name,
which is located on the bottom of the
PrintServer.
A
Plug one end of the Ethernet net-
work cable into the PrintServer's
LAN port.
B
Connect the other end to your
networked hub, switch, or router.
C
Use the USB cable to connect
your USB printer to the PrintServer's
USB port.
D
Use the parallel printer cable (not
included) to connect your parallel
printer to the PrintServer's parallel
port.
E
Power on your printer.
F
Plug the power adapter's cord
into the PrintServer's Power port.
G
Plug the power adapter into an
electrical outlet.
2
A
C
D
F