Hitachi 46F500 Operating Manual page 37

VIDEO
Manual Convergence Adjustment Mode
NOTES: 1. Please turn ON your television for at least 20 minutes before using this feature.
2. Auto Adjustment Mode is recommended. If convergence is still not acceptable, use the Manual Adjustment Mode.
DO NOT press MAGIC FOCUS or use Auto Adjustment Mode after using Manual Adjustment Mode.
Using the Remote Control, select VIDEO-MAGIC FOCUS-MANUAL ADJUSTMENT MODE-START to access convergence crosshatch
pattern. The adjustment point is indicated by the Adjustment Point Cursor.
To Move Adjustment Point
To move the Adjustment Point Cursor, use the CURSOR buttons. The Adjustment Point Cursor must be WHITE.
Another way to move the Adjustment Point Cursor is to press the followiing buttons: [2] up, [4] left, [5] down, [6] right. If you use the
number buttons while the adjustment point is WHITE, it will change to RED.
To Change the Color of Adjustment Point
Press the SELECT button repeatedly (WHITE-RED-BLUE-WHITE...). Green color is fixed and cannot be adjusted.
To Adjust the Convergence
Move the Adjustment Cursor to the point to be adjusted. Use the CURSOR
(reference color). Properly aligned, all three colors should appear white.
Video
Audio
Ch. Manager
Locks
Setup
MENU
Move Sel
SEL
Video
Magic Focus
Aligns the Red, Green, and Blue
colors to correct for Magnetic
Influences.
Adjustment Mode
Auto
Manual
If you want to adjust now
Move Return
SEL
If convergence is acceptable after Manual Convergence adjustment, press EXIT button to access menu mode.
Press the [1] button on the remote control to SAVE adjusted data and return to main picture.
Press the [2] button on the remote control to CANCEL adjusted data and return to main picture.
Press the [3] button on the remote control to recall the factory pre-set convergence data.
Press the [4] button on the remote control to return to the manual convergence adjustment mode (crosshatch pattern).
Press the [9] button on the remote control to read the SAVED adjusted data. If there is no saved data, pressing the [9] button will recall
the factory pre-set data.
CURSOR
CURSOR
Start
DONE
CANCEL
EXIT
INI. RESET : [3]
BACK
, , , to match the RED and BLUE colors to GREEN
Video
Picture Mode
Contrast
Brightness
Color
CURSOR
Tint
Sharpness
Vertical Position
Magic Focus
Color System
Advanced Settings
Move
CURSOR
SELECT
: [1]
: [2]
: [4]
37
Sports
100%
50%
50%
50%
Select
SEL
Adjustment Point
Cursor