Install The Adapters And Surf The Web With Wifi - NETGEAR XWNB5602 Installation Manual

Install the Adapters and Surf the Web with WiFi

1. Secure your Powerline network.
a. Make sure that the Power LED is solid green on each
Powerline device.
b. On the XAV5602 adapter, press its Security button for 2
seconds, and then release the button. The Power LED
blinks green while the adapter is setting up security.
c. Within 2 minutes, go to the XWN5001 access point and
press its Security button for 2 seconds, and then release
the button.
d. After a few seconds, the security is set and the Power LED
turns solid green.
6