Table of Contents
Advertisement
To secure your Powerline network:
1.
Make sure the Power LED is solid green. If it is amber, connect
a device to one of the Ethernet ports so the adapter exits power
saving mode.
2.
On the first Powerline adapter, press its Security button for 2
seconds. The Power LED blinks green while the adapter is
setting up security.
3.
Within 2 minutes, go to the next Powerline adapter and press its
Security button for 2 seconds.
After security is set, the Power LED turns solid green. The
adapter can communicate over the network. The Powerline LED
is blinking or solid.
11
Advertisement
Table of Contents
