Table of Contents
Advertisement
AirCard® 597E ExpressCard - User Guide
30
Connection Status Area
The Connection Status Area uses the icons shown in the
following table.
Table 6-1: Connection Status Area icons
Icon
AirCard ExpressCard not detected (displayed in the left part of the
Connection Status Area).
The Signal Strength indicator (displayed in the left part of the
Connection Status Area) uses bars to show the intensity of the radio
signal. The number of bars increases as signal strength increases to a
maximum of five bars.
When the bars are dimmed and the antenna icon is crossed out, no
connection is possible for one of these reasons:
•
You are outside the CDMA network coverage area
•
The signal strength is too weak
•
A network or account problem is preventing the AirCard
ExpressCard from obtaining service
Indicates whether 1xEV-DO
Indicates whether 1xEV-DO
Indicates whether 1X is available in this area. (Not displayed if 1xEV-DO
is available).
The Roaming Status indicator shows whether you are roaming onto the
network of a service provider other than your own.
When the indicator is off (gray), you are within the local coverage area
of your service provider. When the indicator is on (solid black), you are
in a "preferred" roaming area. When the indicator is blinking, you are
within the coverage area of a CDMA network but not in a "preferred"
roaming area.
Your coverage area and account charges depend upon your service
provider and the type of account you have. There may be surcharges
for roaming service that vary based on whether you are in a preferred or
non-preferred roaming area. If there is no roaming agreement between
your service provider and the local carrier, you may be unable to
complete calls.
The In Use indicator shows whether a call is in progress. No icon is displayed when
the AirCard ExpressCard is idle. Otherwise, one of these icons is displayed:
A high-speed (1xEV-DO
A high-speed (1xEV-DO
A high-speed (1X) packet data call is in progress.
Meaning
Rev. A
is available in this area.
Rev. 0
is available in this area.
Rev.
A)
packet
data call is in progress.
Rev.
0)
packet
data call is in progress.
2130917
Advertisement
Table of Contents
