Table of Contents
Advertisement
Note: Do not forcefully insert the
AirCard ExpressCard. This may
damage the connector pins.
16
To install the AirCard ExpressCard, you require these system
resources:
Table 3-1: System resource requirements
ExpressCard slots
One ExpressCard/34 or ExpressCard/54
slot; alternatively, a Type II PC Card slot
and an ExpressCard/34 adapter (sold
separately).
I/O resources
1 IRQ, 40 bytes I/O space
Memory
32 MB
Disk space
32 MB
AirCard ExpressCard
installation procedures
Note: Users of Windows Vista and Windows 2000 must be logged in
with administrative privileges to install the AirCard ExpressCard
software. Users of Windows XP may require administrative privileges,
depending on the Windows XP installation.
To install Watcher and the AirCard ExpressCard drivers:
1.
Insert the AirCard ExpressCard into your ExpressCard
slot (described in "Inserting the AirCard ExpressCard" on
page 18). (If your computer does not have an ExpressCard
slot, then insert the AirCard ExpressCard into the
ExpressCard/34 adapter [sold separately], and insert the
AirCard ExpressCard into the PC Card slot.)
2.
If you're running Windows Vista, in the AutoPlay window
Sierra Wireless Watcher Installation
click
The Software Installation Wizard should start automati‐
cally.
3.
In the installation window, click
Open With...
4.
If the
window appears, cancel the installation
(your computer is missing some files required for the
installation). Search for
Windows 2000) among the downloads at
www.microsoft.com. Install the file on your computer,
remove the AirCard ExpressCard from your computer,
then rerun the AirCard ExpressCard installation.
Installation
.
Next
.
Instmsiw.exe
(if you're running
2130917
Advertisement
Table of Contents
