Diagram Of Outdoor Unit Installation - Sanyo CM1972A Technical & Service Manual

Diagram of Outdoor Unit Installation

2-6.
Never install only a single indoor unit.
Be sure to connect indoor and outdoor units only in
combinations that are listed in the catalog or in the
combination table that was provided with the outdoor unit.
(Use caution. Connecting any other model may result in
operation failure and malfunction.)
The dimensions indicated by
spaces that are required in order to maintain
performance. Install in a location where the dimensions
indicated by
of the unit are unobstructed. In principle, the top direction
should be unobstructed.
Ensure 6"(15cm)
of space if a
drain hose is to
be used.
Base (not provided)
(concrete or similar material)
in the figure below are
are ensured, and where 2 or more faces
Power breaker
D
C
B
A
Fasten with anchor bolts
(not provided)
(3/8" or M10, 4 locations)
Service space
Ground
wire
(not
provided)
Fig. 7
14
Ceiling-mounted
Wall-mounted types
cassette types
Indoor unit D
Indoor unit D
Indoor unit C
Indoor unit C
Indoor unit B
Indoor unit B
Indoor unit A
Indoor unit A
Access panel C