Restrict Wireless Access By Mac Address - NETGEAR JWNR2000Tv3 User Manual

N300 Wireless Router Model JWNR2000Tv3
Note: The Fragmentation Length, CTS/RTS Threshold, and Preamble
Mode options are reserved for wireless testing and advanced
configuration only. Do not change these settings.
• WPS Settings.You can add WPS devices to your network:
• Disable Router's PIN. The router's PIN lets you use the WPS PIN method to join
the wireless network. Selecting this check box disables the PIN, which means the
WPS PIN method cannot be used.
• Keep Existing Wireless Settings. By default this check box is selected so that
when WPS is used to join the wireless network, the router wireless settings do not
change.
• Wireless Card Access List. Click the Set Up Access List button display the
Wireless Card Access List screen. You can restrict access to your network to specific
devices based on their MAC address.
3. Click the Apply button.

Restrict Wireless Access by MAC Address

You can set up a list of computers and wireless devices that are allowed to join the wireless
network. This list is based on the unique MAC address of each computer and device.
Each network device has a MAC address, which is a unique 12-character physical address,
containing the hexadecimal characters 0–9, a–f, or A–F only, and separated by colons (for
example, 00:09:AB:CD:EF:01). Typically, the MAC address is on the label of the wireless
card or network interface device. If you do not have access to the label, you can display the
MAC address using the network configuration utilities of the computer. You might also find the
MAC addresses in the Attached Devices screen.
To restrict access based on MAC addresses:

1. Select Advanced > Advanced Setup > Advanced Wireless Settings and click Setup
Access List.
The Wireless Card Access List screen displays.
66