NAME OF PARTS
Front cover
Retainer
NOTE:
Install the side handle with the supplied 4 bolts and 4 spring lock washers. Tighten the
bolts securely with the supplied wrench.
SPECIFICATIONS
Motor
Power Source
Current
Full-Load Impact Rate:
Weight
ACCESSORIES
CAUTION:
Only following genuine accessories for this power tool should be used.
The use of any other attachment or accessory is not recommended because it may cause
hazard including bodily injury.
STANDARD ACCESSORIES
1.
Hexagon Bar Wrench 10 mm (for M12) (Code No. 993740) ........................................... 1
2.
Hexagon Bar Wrench 6 mm (for M8) (Code No. 872422) ............................................... 1
3.
Hexagon Bar Wrench 4 mm (for M5) (Code No. 944458) ............................................... 1
4.
Side Handle (Code No. 956527) ........................................................................................ 1
5.
Bolt (Code No. 949759 Z) .................................................................................................. 4
6.
Spring Lock Washer (Code No. 949457 Z) ....................................................................... 4
5
Handle
Housing
Side handle
Fig. 1
Single-Phase, Series Commutator Motor
Single-Phase, 115V AC, 60 Hz
12.2A
850/min
68.4 lbs (31.0 kg)
Switch trigger
Tail cover
Hexagon socket
hd. bolt (M5 x 10)
Housing cover
Name plate
Bolt, Spring lock washer
(M8 x 30)