Graco PD229521B Owner's Manual page 4

4. To create a secure installation, while
pushing down on the base, pull the free
end of the lap belt or the shoulder portion
of the lap/shoulder belt to tighten
5. Check that belt does not move by pulling
and pushing hard on base with hands near the
vehicle belt path. If belt loosens or lengthens,
repeat procedure. If it does not stay tight, try
another seating position or contact Graco at
1-800-345-4109.
6. Push the infant restraint down into the
base and make sure that you hear a "click"
Pull up on the infant restraint to be sure it is
latched securely into the base.
If the infant restraint does not securely latch
into the base, the infant restraint provides NO
protection for your child. DO NOT use the
infant restraint/base if the infant restraint
does not securely latch into the base.
7. Test infant restraint for secure
installation as described in infant
restraint "Final Safety Check" page 9.
.
.
4
CLICK!