Hitachi DH 24PD Instruction Manual And Safety Instructions page 13

CAUTION:
When the drill bit touches an iron reinforcing rod, the bit will stop immediately
and the rotary hammer will react to revolve. Therefore please grip the side
handle and handle tightly as shown in Fig. 7.
3. Using the dust-collecting adaptor
and dust bag.
Using this unit with the dust-collecting
adaptor and dust bag attached creates
a more hygienic working environment
free of flying dust. Attach as shown in
Fig.1. The unit can be used as an ordi-
nary rotary hammer when the dust-col-
lecting adaptor and dust bag is not at-
tached.
(1) Attaching the dust-collecting adaptor
and the dust bag.
a) Attaching the dust-collecting adap-
tor.
Loosen the knob on the side handle
and insert the attachment rod on the
dust-collecting adaptor in the
mounting hole.
The adaptor can be inserted from
either direction A or B (see Fig.8).
Insert and push in the hose in the
hose attachment hole of the main
unit until it reaches the inner sur-
face (depth 5/8" (15 mm)) and con-
firm that it is firmly fixed. (see Fig.9)
b) Attaching the dust bag.
Insert the dust bag firmly in the dust
bag attachment hole on the main
unit and fasten securely (see Fig.10).
CAUTION:
The dust-collecting adaptor and dust
bag is made for use when drilling con-
crete. Do not use for drilling holes in
metal or wood.
Attachment Mounting Hole
Rod
Dust
Collecting
Adaptor
Knob on Side Handle
Dust Bag
Attachment
Hole
Fig. 10
B
A
Fig.8
Hose
Attachment
Hole
Hose
Hose
Body
Fig.9
Dust Bag
Hose
13