Download Print this page

Nady Systems CM-100 User Manual

Condenser measurement microphone

Advertisement

Quick Links

Thank you for choosing the Nady CM-100 ultra linear classic diaphragm electret
condenser microphone. Optimally designed for precise alignment applications
such as room acoustics corrections. Perfect also for many recording uses,
both instruments and vocals.
Features
• True, symmetric omni-directional pattern, high sensitivity,
minimal self-noise, increased dynamic range, high
SPL capability, and extremely smooth, linear 15Hz to
20KHz frequency response provide ultimate precise
measurements and transparent recordings
• Perfect for use with realtime analyzers for precise, accurate
room acoustics alignments
• Especially suited for highly effective, detailed recording of
acoustic guitars and vocals
• Rugged construction, gold-plated XLR, and internal assembly
shockmount for maximum reliability
• Includes foam windscreen for outdoor applications and mic
stand clip (including 5/8" to 3/8" adapter)
Precautions and Care
• The microphone should never be dropped or subjected
to extreme shock. Store only in a padded case to protect it
during transport
• Keep the microphone away from extremely high
temperatures (above 140˚F or 60˚C) and humidity and
avoid leaving it in direct sunlight for long periods of time
• When using the microphone outdoors, avoid getting it wet
• After use in a high-moisture application such as a stage
performance, wipe off the microphone with a dry cloth
and allow it to air dry
• Do not store the unit in a closed space (e.g., a plastic bag)
until all moisture has evaporated
Frequency Response / Polar Pattern

USER GUIDE

CM-100
Condenser Measurement Microphone
Standard Items Supplied
• CM 100 microphone
• Microphone clip
• Foam windscreen
• Instruction manual

Optional Accessories

• SMCC-1 Foam padded plastic carrying case
• SMPS-1 48V phantom power supply
• MST-5B microphone stand
• XC-20 XLR low noise 20 ft. microphone cable

Specifications

Transducer Type
Impedance
Sensitivity
Frequency Response
Current Consumption
Maximum SPL
Connector
Phantom Power
Dimensions
Weight
Specifications subject to change at any time without prior
notice for purposes of product improvement
Omni-directional electret condenser
600 Ohms
-40dB (0dB = 1V/Pa)
20Hz-20kHz
<2mA
>120dB
Gold-plated XLR
15-48V
Diameter: 0.87" (22.22 mm)
Length:
7.5" (190 mm)
4 oz (120 g)

Advertisement

loading

Summary of Contents for Nady Systems CM-100

  • Page 1: User Guide

    USER GUIDE CM-100 Condenser Measurement Microphone Thank you for choosing the Nady CM-100 ultra linear classic diaphragm electret condenser microphone. Optimally designed for precise alignment applications such as room acoustics corrections. Perfect also for many recording uses, both instruments and vocals.
  • Page 2: Service Information

    Nady Systems, Inc. warrants to the original consumer purchaser (U.S.A. only) that your unit is free from any defects in material or workmanship for a period of one year from the date of purchase. If any such defect is discovered within the warranty period, Nady Systems, Inc. will repair or replace the unit free of charge, subject to verification of the defect or malfunction upon delivery or shipping prepaid to Nady Systems.