INSTALLING
Continued
102650
INSTALLING LOGS
Failure to position the parts in accordance with these diagrams or failure
to use only parts specifically approved with this heater may result in
property damage or personal injury.
Each log is marked with a number. These numbers will help you identify the log
when installing. It is very important to install these logs exactly as instructed. Do
not modify logs. Only use logs supplied with heater.
1. Slide front log (#1) into place behind front burner. Make sure tabs at bottom of
log are behind front burner (see Figure 16).
2 . Slide rear log (#2) into place behind rear burner (see Figure 17).
3. Place left front branch (#4) and right front branch (#5) (24" and 30" models) or
front branch (#4) (18" model) into place (see Figure 18). Make sure notches on
bottom rest on grates.
4. Add lava rock around base of heater.
Tab
Figure 17 - Installing Rear Log
WARNING
Front Log (#1)
Figure 16 - Installing Front Log
Rear Log (#2)
Figure 18 - Installing Rear Log
Left Branch (#4)
Right Branch (#5)
19