PQI Air Bank A300V User Manual page 23

least 8 and up to 63 alphanumerical characters (case sensitive).
WAN Mode:
DHCP or Static IP. Default is DHCP. To set Air Bank for static IP, please change WAN Mode
to "Static" and then the IP Address field can be modified.
Wireless Station Configuration:
Station SSID: Set the Wi-Fi station SSID
Station Security Mode: Set the Wi-Fi station encryption
Station Password: Set the Wi-Fi station password
[Connect] button: Push the [Connect] button to connect to the Wi-Fi station
[Disconnect] button: Push the [Disconnect] button to disconnect from the Wi-Fi station
Reminder: In you lost your password and cannot access the Air Bank, please push and hold
the Reset for 3-5 seconds to reset to factory default. This will not delete data stored on the Air
Bank.
Web Setup/Using Wireless Station
(1) Push and hold the Power Button for two seconds to power on with green indicator. After
a few seconds, Wi-Fi is enabled with flashing blue indicator.
(2) Connect your Wi-Fi device to the Air Bank.
(3) After connection is established, launch the Internet browser and enter "192.168.100.1" in
the address bar.
Login Screen
(1) Enter user name and password
(2) Push [Login] button
Setup Web Login
(1) Enter the user name and password
(2) Confirm password
(3) Push OK
(4) Use new user name and password to login
23