Adjusting Chronograph Hands To Zero Position - Luminox CHRONOGRAPH ALARM Instruction Manual

Hour counter Center stop-second
2 1
I II III
Minute counter
Push-button A
2 1
III
Push-button B
Adjusting the chronograph
hands to zero position
Example:
One or several chronograph hands are not
in their correct zero positions and have to be
adjusted (e.g. following a battery change).
Pull out the crown to position III (all 3
chronograph hands are in their correct
or incorrect zero position. The display
changes from alarm time to reference
time.)
Keep push-buttons A and B depressed
simultaneously for at least 2 seconds
(the center stop-second rotates by
360° corrective mode is activated).
A Adjusting the center stop-second
Single step
Continuous
Adjusting the next hand B
B
Adjusting the minute counter hand
A
and the hour counter hand
(mechanically coupled)
Single step
Continuous
Returning the crown to position I
Termination of the chronograph hands adjustment
(can be carried out at any time).
from reference to alarm time.
I II III
A
1 x short
A
long
A
1 x short
A
long
The display changes