Chronograph: Basic Function; Accumulated Timing; Zero Positioning; Reset - Luminox CHRONOGRAPH ALARM Instruction Manual

Hour counter Push-button A
2 1
Minute counter
2 1
Push-button B

Chronograph: Basic function

(Start / Stop / Reset)
Example:
Start: Press push-button A.
Stop: to stop the timing, press
pushbutton A once more and read
the 3 chronograph counters:
4h / 20 min / 38 sec

Zero positioning:

Press push-button B.
(The 3 chronograph hands will be reset to
their zero positions).
Note
The alarm cannot be used as long as the
chronograph is in operation.
Hour counter Push-button A
2 1
Minute counter
2 1
Push-button B
Chronograph:

Accumulated timing

Example:
Start: (start timing)
Stop: (e.g. 15 min 5 sec following
Restart: (timing is resumed)
* Stop: (e.g. 10 min 5 sec following
= 25 min 10 sec
(The accumulated measured time is shown)

Reset:

The three chronograph hands are returned
to their zero positions.
Please note:
* Following , the accumulation of the
timing can be continued by pressing
push-button A
(Restart / Stop, Restart / Stop, ...)
)
)