Adjusting The Chronograph Hands To Zero Position - Luminox 9440 Series Instruction Manual

Minute counter Centre stop-second
I II III
Hour counter
Push-button A
III
Push-button B
Adjusting the chronograph
hands to zero position
Example:
One or several chronograph hands are not
in their correct zero positions and have to be
adjusted (e.g. following a battery change).
Pull out the crown to position III
(all 3 chronograph hands are in their
correct or incorrect zero position).
Keep push-buttons A and B depressed
simultaneously for at least 2 seconds
(the centre stop-second rotates by
360° corrective mode is activated).
A Adjusting the centre stop second
Single step
Continuous
Adjusting the next hand B
B
A
Adjusting the minute counter hand
and the hour counter hand
(mechanical coupled)
Single step
Continuous
Returning the crown to position I
Termination of the chronograph hands
adjustment (can be carried out at any time).
I II III
A
1 x short
A
long
A
1 x short
A
long