Oregon Scientific WMR100NA Quick Start Manual

WMR100NA Base

WIND SENSOR

TEMP & HUMIDITY SENSOR
Locate the battery compartment and open the battery door and install
two AA batteries.
1
3
2
Unscrew the anemometer part of the Wind While holding the sun shield, turn the sensor counter-
Sensor. clockwise
Pull down the sensor
Slide the battery cover and insert two AA
batteries matching the polarities (+/-). Slide the battery cover off and insert two AAA batteries
matching the polarities (+/-)
Press the reset button.
Press the reset button
Insert sensor back into heat shield, turn clockwise to
secure
7
5
6
4
10
8
10
9