Chapter 2 Preparing To Use Lun Expansion Or Virtual Lvi/Lun; Set Up The 9900V Subsystem And Remote Console Pc(S); Launch Lun Expansion Or Virtual Lvi/Lun - Hitachi 9900 V Series User Manual

Chapter 2 Preparing To Use LUN Expansion or Virtual LVI/LUN
2.1

Set Up the 9900V Subsystem and Remote Console PC(s)

Before launching LUN Expansion or Virtual LVI/LUN, you must take several preliminary steps.
For detailed instructions, please refer to Hitachi Freedom Storage™ Lightning 9900™ V Series
Remote Console – Storage Navigator User's Guide (MK-92RD101). These include the
following:
Install the 9900 subsystem.
Install the PC(s) that you intend to use as Remote Consoles, and connect them to the
9900V internal LAN.
Enable LUN Expansion and/or Virtual LVI/LUN on each subsystem where you intend to
use these options.
2.2

Launch LUN Expansion or Virtual LVI/LUN

To use LUN Expansion or Virtual LVI/LUN, you must first log on to the primary SVP. For
detailed instructions on the login process, see Hitachi Freedom Storage™ Lightning 9900™ V
Series Remote Console – Storage Navigator User's Guide (MK-92RD101).
If you successfully log on to the primary SVP, the Remote Console Main panel opens (see
Figure 2.1). The Option buttons are displayed vertically on the left side of the panel. The
LUN Expansion (LUSE) Virtual LVI/LUN (VLL) button (
Figure 3.1).
Hitachi Lightning 9900™ V Series LUN Expansion and Virtual LVI/LUN User's Guide
PRELIMINARY RELEASE
) opens the LUSE/VLL panel (see
11