Download Print this page
LG GSA-H54N Setup Manual

LG GSA-H54N Setup Manual

Super multi dvd rewriter
Hide thumbs Also See for GSA-H54N:

Advertisement

Quick Links

Installing the Drive

Before installing the drive, turn off
the system power.
Disconnect the power cord,
and remove the cover.
• Remove a vacant 5.25" drive bay panel from
the computer. Slide the drive into the drive
bay.
Set the jumper on the rear of
the drive as necessary.
A. When using a Primary IDE port
If you need to connect your drive to the same
primary IDE channel as the hard drive, the drive
should be set to SLAVE position.
B. When using a Secondary IDE port
❶ If there is no device connected to the
secondary IDE channel, connect the
drive to this channel and set the jumper
to MASTER.
❷ When two drives are connected, set one
drive to MASTER and the other drive to
SLAVE. If your operating system encounters
interface problems after installing the new
drive, try swapping the jumpers or move
one drive to another IDE channel.
Method A
Super Multi DVD Rewriter
Method B
Super Multi DVD Rewriter
Super Multi DVD Rewriter
Super Multi DVD Rewriter
Super Multi DVD Rewriter
First Drive
Second Recorder

Advertisement

loading

Summary of Contents for LG GSA-H54N

  • Page 1: Installing The Drive

    Installing the Drive Before installing the drive, turn off the system power. Disconnect the power cord, and remove the cover. • Remove a vacant 5.25” drive bay panel from the computer. Slide the drive into the drive bay. Method A Set the jumper on the rear of the drive as necessary.
  • Page 2 Connect the IDE data cable/DC power cable to the drive. ❶ Connect the IDE data cable to the back of the drive. * Using a 40-pin IDE cable might bring the '04/08/03 error (LOGICAL UNIT COMMUNICATION CRC ERROR (ULTRA-DMA/32))'. In this case, substitute to 80-pin type IDE cable is highly recommended.
  • Page 3: System Environment

    (DVD-VIDEO) : 8X max Please visit www.lgservice.com and install the program, (DVD+R Double layer): 12X max “LG ODD Online F/W update.” By using the program, (DVD-R Dual layer): 12X max you can automatically check the latest information about FirmWares and (DVD-RAM): 12X max update the FirmWare.
  • Page 4: Safety Instructions

    Consertos ou manutenção devem ser feitos somente pelo Serviço L’utilisation de commandes ainsi que l’exécution de procédures autres Autorizado LG. O uso dos controles ou a execução de procedimentos que celles spécifiées dans le présent guide risque de provoquer une diferentes que não sejam os especificados neste manual podem...

This manual is also suitable for:

Gsa-h54l