Component Set - Hitachi 43FDX01B Operating Manual

COMPONENT SET

The COMPONENT SET function is very useful when setting up reception High Definition, Standard
Definition and NTSC signals.
Press THUMB STICK
(HDTV, SDTV/DVD)
Press EXIT to quit menu or THUMB STICK
NOTE: Set up a Component Signal (connect component to Y-PB-PR inputs) and switch to VIDEO: 1 or 2
by pressing the INPUT button on the Remote Control when planning to use the component set function.
COLOR SYSTEM
The COLOR SYSTEM function allows you to automatically change tint and color coordinate for
DTV Programs.
HDTV - High Definition Television - Use for High Vision Signal Y-PB-PR from HDTV
Set-Top Box.
SDTV /DVD - Standard Definition Television or Digital Video Disc Y-CB-CR such as
DVD (Digital Video Disc Player).
NOTE:
1 . If Color System is set improperly (does not match actual input signal), the color and tint of the main
picture will be abnormal.
2. You must be tuned to VIDEO: 1 or 2 input and have a component hooked up to the Y-PB-PR input jacks
to access this COMPONENT SET menu.
3. All settings will affect only the component input you are currently viewing. If you are using both sets of
component input jacks, be sure to set the COMPONENT SET feature for both inputs (set COMPONENT 1
AND COMPONENT 2).
or to highlight then press down on THUMB STICK to select Color System
to return to previous menu.
44