User's Manual
4.8. Charging without the desktop charger
Step 1: Connect the AC adaptor to a wall socket.
Step 2: Remove the connector cover from the WirelessIP5000.
Step 3: Install the AC adaptor's 24-pin connector to the bottom of the WirelessIP5000.
Note: You can also charge with the optional USB cable instead of with the AC adaptor.
4.9. LED
LED color
Red
Blue
H it a c hi C ab le
Figure 5
Status
Operating, Call underway
Charging (Goes out when the charging is complete)
Table 1
8 1 /8 4