Hitachi WIRELESSIP TD61-2472A User Manual page 55

User's Manual
You can switch the ringtone/ mode/ LED for inside lines and outside lines.
2
To set the ringer for a call coming in on an outside line, either press the "1"
on the number pad or select "1. External 1", then press the
To set the ringer for a call coming in on an inside line, either press the "3"
on the number pad or select "3. Internal 1", then press the
There are four settings available, two each for inside and outside lines.
Example
Setting Ringer
External 1 Bell 1
External 2 Bell 5
Internal 1 Bell 11
Internal 2 Bell 13
* Depending on the device connected, this is not possible. In this case, only
"1. External 1" is enabled.
Displays configuration information. (Ringtone, Mode, LED)
3
There are four modes.
・ Bell (bell)
・ Vibration (vibration)
・ Bell + vibration (bell + vibration)
・ Silent (mute)
There are three LED colors.
・ RED
・ BLUE
・ (None)
H it a c hi C ab le
Mode
Bell
Vibration
Bell + vibration
Mute
5 2 /8 4
key.
key.
LED
Blue
Red
No
alert
Blue