Table of Contents
Advertisement
5. Have another person hold the Console (4) near the
Upright (2).
Connect the Wire Harness (43) to the wire harness on
the Console (4). Connect the Pulse Wire (3) to the
pulse wire on the Console. Next, locate the two ground
wires that are connected with a screw to the Upright
(2). Connect the ground wires to the two smallest wires
on the Console.
Carefully insert all excess wiring down into the Upright
(2). Attach the Console (4) to the Upright with four M4
x 16mm Screws (57). Be careful to avoid pinching
the wires. Next, press the bookrack onto the Console
in the indicated location.
6. Attach the Seat (9) to the Seat Frame (7) with four 1/4"
x 16mm Button Screws (80) and four M8 Washers (60).
7. Attach the Seat Frame (7) to the Seat Carriage (11)
with two M10 x 52mm Button Bolts (82) and two M10
Nylon Locknuts (63).
5
3
2
57
6
9
60
7
82
7
Bookrack
4
43
Ground Wires
Do not pinch
the wires
during this step.
7
60
80
7
11
63
Advertisement
Table of Contents
