Other Features - Kenwood TM-D710E Brochure & Specs

Station list: This stores a maximum of 100 stations – including fixed base,
mobile, object and weather stations – and offers filtering so you can select
from the different types. You can also sort them by call sign, reception time
and distance from your own station.
Versatile messaging:
• 100 messages (up to 67 characters each)
• Status: 4 x 42 characters (max.),
1 x 32characters (max.)
• User phrases (preset for rapid message input):
4 types (up to 31 characters each)
• Special call function: Immediate notification when a message is received
from a designated station. The APRS system is capable of transmitting
e-mail, so you can send (not receive) e-mail messages from the TM-D710E.
Wide-range of functions available from more than 60 APRS menus:
• QSY function
(Exchange operating frequency via APRS)
• Auto Message Reply
• Digipeater capability
• Packet filter
SEPARATE PANEL WITH EXTRA-LARGE
2-COLOR SWITCHABLE BACKLIGHT LCD &
MULTIFUNCTION KEY DISPLAY
The TM-D710E has a separate control panel with an extra-large
display that clearly identifies the multifunction keys for easy operation.
To maximize visibility, the backlight color can be switched between warm
amber and cool green. And two different stands are supplied: one for
on-dash installation, and the other for fixed stations.
Amber
HIGH RF POWER OUTPUT (50W)
The TM-D710E provides an impressive 50 watts of RF power (VHF & UHF),
plus a choice of High/Mid/Low output.
DUAL RECEIVE ON SAME BAND (VxV, UxU)
In addition to simultaneous receive on both VHF and UHF bands, this radio can
receive two frequencies on the very same band. This means, for example, that
you can have both the call channel and local channel, or the repeater channel
and local channel, on the same band.
1,000 MULTIFUNCTION MEMORY CHANNELS
There are 1,000 split memory channels for storing
essential data – such as transmit and receive
frequencies, frequency step, and tone frequency –
plus an additional 10 for programmable scan. You
can identify each channel with up to 8 alphanumeric
characters (Memory Name function). Additionally,
memory data can be edited and stored on a PC using the optional PG-5G
programming interface cable and MCP-2A Memory Control software (a free
download from the Kenwood website*).
*www.kenwood.com/i/products/info/amateur/software_download.html
• Decay Algorithm
• New-N Paradigm
• 29 Graphic icons display
• 3 Grid square locators
and more...
Green
MULTIPLE SCAN & VISUAL SCAN
As well as VFO scan, program scan, MHz scan, memory scan and call scan,
the TM-D710E offers memory bank scan: the 1,000 channels are grouped
into 10 banks for selective scanning. Also featured are scan resume
(time-operated, carrier-operated, and seek), memory channel lockout, tone
scan, CTCSS scan, and DCS scan. Additionally, using the S meter on the
large LCD you can visually display the signal strength (S0~S7) of stations
within the scanned range.
EchoLink Sysop MODE FOR NODE
®
TERMINAL OPERATION
When the TM-D710E is connected to a PC (with the necessary Windows-
compatible software installed) using the PG-5H option, it can operate as a
node terminal for EchoLink. EchoLink connects radio amateurs through the
Internet using VoIP technology: any transceiver with access to a node can
connect to any other in the world as long as it too has node access. It is
also possible to access the EchoLink network directly from a PC.
To register for EchoLink (using your call sign), access the official website at : www.echolink.org
PC Interface Cable Kit PG-5H
Data Terminal
PC Terminal
Transceiver
TM-D710E
EchoLink MEMORY (AUTOMATIC DIALER)
®
Up to 10 DTMF memory channels dedicated to EchoLink can store call signs
(or conference names) and Node Numbers. Memory Control is also possible
using a PC with the MCP-2A software.

Other Features

Wide reception:118-524MHz,
800-1300MHz
MC-59 16-Key Hand Microphone
with backlighting
Programmable memory capable of
storing 5 independent operating
profiles
DCS (Digital Code Squelch) with 104
selectable codes
Separate VOL/SQL for A & B Bands
Packet Monitor
DX Cluster
Waypoint Data Output
Clock (date/time)
6-pin Mini-DIN Socket for External TNC
8-pin Mini-DIN Socket for PC
Connection (optional programming
cable PG-5G or PG-5H required for
PC connection)
Programmable Function Keys
Band Mask
Call Channel
S-meter Squelch & Hysteresis Timer
Monitor Function
Mic
Line Out
9-Pin D-SUB Terminal
Mute
3-hour Auto Power Off
MHz Mode
Selectable Frequency Step
Shift Function
Repeater Offset (selectable)
Reverse
Auto Repeater Offset
(ON/OFF, VHF only)
Automatic Simplex Checker
DTMF Memory (10 channels,16 digits)
DTMF Remote Control
Time Out Timer
Key Lock
Power-on Password
Memory Shift
Programmable VFO
Beep On/Off, Volume Control
Mic Program Function
Channel Display Mode
Power-on Message
LCD Brightness Control, Auto Brightness
Switch to External Speaker
Reset (VFO, PART, PM, FULL)
Internet