NordicTrack 831.24924.2 User Manual page 9

3. Identify the Left and Right Base Covers (88, 92).
Slide the Left Base Cover (88) onto the left
Upright (79). Slide the Right Base Cover (92)
onto the right Upright.
Then, press the Left and Right Base Covers (88,
92) downward until they snap into place.
4. Remove the tie (not shown) securing the Upright
Wire (84) to the right Upright (79).
With the help of a second person, hold the con-
sole assembly (A) near the Upright (79).
Attach the console assembly (A) with four 5/16"
x 1" Screws (2) and four 5/16" Star Washers (3).
Start all four Screws, and then tighten them.
See the inset drawing. Be careful not to pinch
the wires (B, 84).
3
88
4
A
2
3
9
79
84
B
2
3
B
84 79
92