Hitachi UltraVision L42S601 Operating Manual page 25

How to Use the Remote to Control Your TV
²
MENU button
The MENU button will start the On-Screen Display.
¶
EXIT button
This button will exit all On-Screen Displays.
º INPUTS button
When the remote control is in TV mode, press this
button to access the INPUTS menu. Use the
CURSOR and SELECT buttons to scroll and select
the inputs that are being used. Pressing the
INPUTS button repeatedly will also cycle through
the Inputs menu items. Then press the SELECT
button to select.
HDMI 2
HDMI-Front
Air / Cable
Input 1
Input 2
Move SEL Select
INPUT 1 Select to choose INPUT 1.
INPUT 2 Select to choose INPUT 2.
INPUT 3 Select to choose INPUT 3.
INPUT- FRONT Select to choose side INPUT .
HDMI 1 Select to choose HDMI 1 INPUT.
HDMI 2 Select to choose HDMI 2 INPUT.
HDMI- FRONT Select to choose side HDMI INPUT.
AIR/CABLE Select between Air or Cable signal.
ANTENNA button (ANT)
¾
Use this button to access AIR/CABLE signal input
directly.
µ
CURSOR buttons/SELECT button
All the On-Screen Display features can be set or
adjusted by using the CURSOR buttons and the
SELECT button, except for numeric entries. Press
the CURSOR buttons toward desired direction and
press the SELECT button to select.
¸ CLOSED CAPTIONS (CC) button
Use this button to display the dialogue, narration,
and/or sound effects of a television program or home
video which are displayed on the TV screen when
available. Your local TV program guide denotes
these programs as or
¹
GUIDE button
[Cable Box (CBL), Satellite Receiver (SAT)/
Set-Top-Box (STB) mode only]
The use of this button is only applicable when the
remote control is in (CBL) and (SAT/STB) mode.
Press this button to access the Channel Guide of
the (CBL), and (SAT/STB).
Program Information
Program Run Time
Program Information
Program Run Time
.
NOTE: 1. Press the INFO button again or the EXIT
INFO button
Press this button when you want to check the
channel being received, the picture source, if
the channel has stereo (ST) or second audio
program (SAP), the time, CHANNEL ID and if
the TIMER is set.
ANALOG CHANNELS
Show Name
3:00PM- 3:30PM
ST TV-G 480i
Broadcast Picture Format
Audio
Broadcast Rating
10:00 AM
Auto STEREO
Closed
Audio Source
Event timer
Caption setting
Selection
DIGITAL CHANNELS
Digital Closed Caption
This icon will appear only when
receiving a Digital Broadcast with
Closed Captioning.
Show Name
REGION 5
3:00PM- 3:30M
DTvCC TV-G
ST 1080i
Audio Alternate Broadcast Picture Format
Broadcast
Rating Rating
Program Description
(Press INFO again for a more detailed description)
Auto 10:00 AM
Closed
Event timer
Caption setting
When an S-VIDEO Input is connected
to INPUT 1
Auto
When a Component Video: Y-PbPr
Input is connected to INPUT 3
Input Signal
Format
Auto
button to return to normal viewing.
2. The Aspect setting will not be shown if
the channel is locked.
Analog Channel
Main Picture Source
and channel indication
A Air 8
Broadcast channel
KXYZ-HD
identi cation
3:17PM
Clock
Digital channel
Main Picture Source
D
Air 15-1
and channel indication
KPBS-HD
Broadcast channel
3:17PM identi cation
Clock
S-IN: 1
480i 3:17PM
Y-PBPR: 3
480i 3:17PM
25