Hour Meter; Blade Switch; Ignition Switch - Husqvarna MZ28T Operator's Manual

Hour Meter

The hour meter displays the total operating time.
It will flash CHG OIL (Change Oil) at 50 hour intervals.
The flash duration is one hour before and one hour
after the interval. The CHG OIL icon will come on
and shut off automatically. The hour meter cannot be
manually reset.

Blade Switch

To engage the mower deck, pull the blade switch
knob out. The mower blades are disengaged when
the knob is pressed down fully.

Ignition Switch

The ignition switch is placed on the control panel and
is used to start and stop the engine.
Turn the key clockwise to start the engine.
CONTROLS
Hour meter
Blade switch
Ignition switch
8058-043
8058-043
8058-045
19