Hitachi UltraVision L46S603 Operating Manual page 32

Video
Aspect Ratio reference
Input Signal
When Watching Standard Definition Pictures:
(4:3 Signal)
(Vista)
(Cinema)
When Watching High Definition Pictures:
(16:9 Signal)
Reset
This function allows you to Reset the Video Menu Settings of the
present input and return it to the Dynamic video mode.
Video
Audio
Setup
Channels
Multimedia
Move
SEL
1. Use the CURSOR PAD
2. Press the SELECT button or CURSOR PAD
Yes or No.
3. Press the SELECT button on the Yes option to execute the
reset of the Video settings.
You can customize each of the Video Inputs to your preference to
increase viewing performance and pleasure, depending upon the
video program being viewed. If RESET is selected, only the present
Input will reset to the initial conditions as explained above.
If RESET is selected in HDMI1, only HDMI1 will return to
factory conditions.
32
Display Aspect
Display Screen
Recomended
Zoom 1
Zoom 2
Gamma 1
Gamma
Off
Dynamic Gamma
30
Backlight
Auto
Auto Movie
Reel120 Motion Off
Auto
Aspect Ratio
Reset
Select EXIT Exit
Return
, to the highlight functions.
To display suitable screen as follows.
Displays 4:3 programs in there original aspect ratio with bars to
4:3
the left and right of the image.
Expands a 4:3 aspect ratio program to fill the widescreen 16:9 screen
16 : 9
Use this aspect mode to expand letterbox movies to fill the screen.
Note that some of the image may not be visible.
Use this aspect mode to fill the screen with very widescreen
movies. Note that some of the image may not be viewable in
this mode.
16 : 9 Plays a 16:9 image faithfully showing 95% of the size.
Use this mode when you want to see 100% of the signal.
Full
Note that some signals have noise. In the case of noise use the 16:9
mode.
to select