Hitachi L26A01A User Manual page 43

TROUBLESHOOTING (continued)
Symptom and Check List (continued)
●
The image on the screen is moving in an
oblique direction.
(PC input mode only)
●
The coarse horizontal stripes could be
seen in full-display mode.
(PC input mode only)
●
The part of the image is lacking.
(PC input mode only)
●
The horizontal stripes are moving
vertically with flickering screen.
(PC input mode only)
●
When the characters are displayed on
the whole screen, the vertical stripes
appear and some of the characters are
blurred.
(PC input mode only)
●
When the letter string is displayed in
full-screen, all of the characters on the
screen is blurred.
(PC input mode only)
●
When the small patterns are displayed
on the screen, the entire screen is
flickering.
(PC input mode only)
●
Image cannot be displayed in the correct position.
(PC input mode only)
41
Symptoms
abcdefgABCDEFGabcd
abcdefgABCDEFGabcd
abcdefgABCDEFGabcd
abcdefgABCDEFGabcd
●
Adjust "Horizontal Clock" and "Clock Phase".
●
Adjust "Horizontal clock".
AAAAA
●
Try "Auto Adjust".
●
Check the Signal status of the PC by
pressing Recall button
control.
●
Try "Auto Adjust".
●
If the display condition is not improved with
Auto Adjust, adjust "Horizontal Clock".
●
Try "Auto Adjust".
●
If the condition is not improved with Auto
Adjust, adjust "Clock Phase" till you get
clearest image.
●
Try "Auto Adjust".
●
If the condition is not improved with Auto
Adjust, adjust "Clock Phase" till you get
flicker-free display.
●
Press button to check if input signal of
the displayed image is compatible with the
specification of the television.
Check list
on the remote
Page
32
32
32
32
32
32
32
42 45
,