Black Enhancement; Dnr; Mpeg Nr; Film Mode - Hitachi L26A01A User Manual

TV SETUP OPERATION (continued)
Picture Setting (continued)
Selected Items

Black Enhancement

DNR

MPEG NR*

Film Mode

3D Comb Filter

Picture Size

Reset

Information
The settings of the item indicated by "
About "Film Mode"
NOTE
● The image might not look natural depending on the image contents.
Phenomena such as
① When switching the subtitles of a film or images, the image displays fine horizontal streak lines.
② When switching the scenes such as commercial and animation, the image displays fine horizontal streak line.
③ When displaying a ticker or subtitle, the text on the image becomes rough ( aliasing).
④ When watching the image form AV input which is connected to any external equipment, the OSD of external
equipment displays fine horizontal streak lines.
These phenomena occur due to the method of converting the image.
Please note that this is not malfunction.
In case that it is disturbing, please set to Off.
In addition, the effect of this menu might vary depending on the size setting (See
Also, this might not be ineffective depending on the scene of image.
Off
Low
Adjusts the black level compensation.
Middle
High
Off
The noise on the screen or interference could be reduced, especially at
Low
the area of weak electric field.
Middle
High
Off
This is a noise reduction system for MPEG picture signal.
Low
(ex. against mosquito noise and block noise)
High
This helps to make the moving image smooth.
Off
On: Automatically identify if it is the movie film and faithfully reproduces
the original film images.
On
Off: Set to Off if the image does not look natural.
Off
This is available only when receiving PAL/ NTSC 3.58 composite signal.
This reduces the dot and color blurring in minute scales so that it can
reproduce purer color.
On
Select [1] it will display the original picture completely. If the images
1
from TV signal (especially CATV) has blacken gap in Panoramic mode,
and select [2], it will make up for the gap. But when display is no
available in "Cinema" size. This function only works for TV, Composite,
2
Component and HDMI input.
Each item on this menu screen can be restored to the original factory
settings by pressing
*
" can be automatically stored depending on the signal mode.
Setup hint
button.
)
36
28