Analogue TV Menu System
Sound Menu
SOUND
Volume
Balance
Sound Mode
Effect
Equalizer
Back : Menu
Volume
When you enter the sound menu, Volume will
be the first selected option. Press
to change the level of the Volume.
Balance
This setting is used for emphasizing the left
or right speaker balance.
Press
or
button to select Balance. Press
/
button to change the level of the balance.
Balance level can be adjusted between -32
and + 32.
Sound Mode
Press
or
button to select Sound Mode.
Using
/
button, you can select Mono,
Stereo, Dual I or Dual II mode, only if the
selected channel supports that mode.
Effect
If you are watching a mono broadcast, set
Effect on to obtain a better sound effect which
will be more stereo-like. If the current sound
system is stereo, switching this effect on will
give a more spatial effect.
Press
or
button to select Effect. Press
/
button to set Effect as On or Off.
ENG-01-TV-22856W-1165UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p65
0
Stereo
On
Off
Exit : TV
/
button
- 33 -
33
Equalizer
Press
or
button to select Equalizer. Press
/
button to change the Equalizer setting. In
equalizer menu, the mode can be changed to
Flat, Speech, Music, Personal and Jazz.
Select the desired frequency by pressing
button and increase or decrease the frequency
gain by pressing
/
button.
Note: Equalizer menu settings can be changed only
when the mode is in Personal.
HP Volume
To adjust headphone volume level, press
or
button to select HP Volume. Press
button to change the level of the HP Volume.
Store
Select Store by pressing
or OK button to store the settings. "Stored"
will be displayed on the screen.
Picture Menu
PICTURE
Picture Mode
Brightness
Contrast
Colour
Sharpness
Back : Menu
Picture Mode
For your viewing requirements, you can set
the related mode option.
Press
or
button to select Picture Mode.
Press
or
button to choose from one of these
options: Bright, Standard, Soft and Manual.
Brightness/Contrast/Colour/
Sharpness/Tint
Press
or
button to select the desired
option. Press
/
button to set the level.
Hint: Tint (Hue) is displayed in picture menu when
the TV receives an NTSC signal.
18.11.2008, 09:16
/
/
/
button. Press
Bright
Exit : TV