Navigating The Analogue Tv Menu System; Analogue Tv Menu System; Picture Menu; Mode - Hitachi L32VC04U Instructions For Use Manual

Select your Country , Language and TXT
Language by using " " or " " and " " or " "
buttons. Press OK or RED button to continue. To
cancel, press BLUE button. The following menu
will be displayed during the automatic tuning:
After APS is fi nalized, the programme table
will appear on the screen. In the programme
table you will see the programme numbers and
names assigned to the programmes.
If you do not accept the locations and/or the
programme names, you can change them via
the program table.
Navigating the Analogue TV
Menu System
• Press " M " to display the main menu.
• Press " " or " " button to select an icon.
• Use " " or " " button to highlight a setting.
• Press " " or " " buttons to change the
settings.
• Press " " for more options.
• Press OK to store.
• To exit the menu or return from sub-menu
screen, press " M ".
Note : These explanations are valid for the navigation
of the analogue TV menu system. To select options
that are explained in the following parts, refer to

"Navigating the Analogue TV Menu System".

Analogue TV Menu System

Picture Menu

Mode

For your viewing requirements, you can set the
related mode option.
Press " " or " " button to select Mode . Press
" " or " " button to choose from one of these
options: Cinema , Dynamic and Natural .

Brightness/Contrast/Colour/Sharpness

Press " " or " " button to select the desired
option. Press " " or " " button to set the level.
Note : Hue option is only be visible when the TV
receives an NTSC signal.

Colour Temp

Press " " or " " button to select Colour Temp .
Press " " or " " to choose from one of these
options: Cool , Normal and Warm .
Note :
• Setting Cool option gives white colours a slight
blue stress.
• Setting Warm option gives white colours a slight
red stress.
• For normal colours, select Normal option.

Noise Reduction

If the broadcast signal is weak and the picture
is noisy, use Noise Reduction setting to reduce
the amount of noise.
Press " " or " " button to select Noise
Reduction. Press " " or " " to choose from one
of these options: Low , Medium , High or Off .
English - 30 -