Advertisement
1. Press MENU and VOL+/- button until the following menu appears on the
screen.
Note: This menu is only appears in PC mode .
2. Press CH+/- button to enter the adjust menu and to go up and down to
select the desired option .
3.Press VOL+/- button to increase and decrease the level to adjust the
selected option to your preference .
Functions:
H-Position: Picture horizontal position adjust.
V-Position: Picture vertical position adjust.
Clock : Adjust the TFT-LCD to match the PC input source.
Phase : Removes any horizontal distortion and clears or sharpness the displayed
characters.
Auto Adjust : Is opted for adjustment of picture location frequency and phase
parameters.
Advertisement
