Preparing The Machine; Programme Selection - Beko DC 7110 Installation And Operating Instructions Manual

Preparing the machine

1. Plug in your machine.
2. Place the laundry in the machine.
3. Press the "On/Off" button.
C
Pressing the "On/Off" button does not
necessarily mean that the programme has
started. Press "Start/Pause/Cancel" button
of the machine to start the programme.
Timer programme selection
Decide the appropriate time from the table
below which includes drying temperature in
degrees. Select the desired time with the timer
programme selection button.
Dry at high temperature only
for cotton laundry. Thick and
multi layered laundry (E.g.:
Extra dry
towels, linens, jeans) are dried
in a way that they do not
require ironing before placing
in the wardrobe.
Normal laundry (E.g.:
tablecloths, underwear) are
Cupboard
dried in a way that they do not
dry
require ironing before placing
in the drawers.
Normal laundry (E.g., Shirts,
Iron Dry dresses) are dried ready to be
ironed.
C
For further programme details, see,
"Programme Selection Table"
Main programmes
Anti-creasing
A 2-hour anti creasing programme to prevent
laundry from creasing will be activated if
you do not take the laundry out after the
programme is over. This programme rotates
the laundry in 600-second intervals to prevent
creasing.
•Ventilation
Only ventilation is performed for 10 minutes
without blowing hot air. You can air your
clothes that have been kept at closed
environments for a long time thanks to this
programme to deodorize unpleasant odors.
•Timer programmes
You can select one of the 20 min...105
min...135 min... timer programmes to achieve
the final drying level. Dry the cotton laundry
at high temperatures and synthetic and easy-
care laundry at low temperatures depending
on the type of the laundry.
C
You must press the "Low temperature"
button for synthetics
14 EN