Canon XF105 White Paper page 14

Left Camera Clip Title Prefix set to "LE"
Turn off image stabilization
You must turn the image stabilization off or the camera's
optical axis' will move independent of each other in
unpredictable ways. As you can imagine this will make it
impossible to tune out disparities later and master your
3D. If you have already set the cameras to use the lens axis
shift then the automatic stabilization will be turned off.
Gain
It is best to shoot on 0dB gain when possible. The noise and grain patterns at high gain levels will be
unique on each camera for each frame and therefore will be a visual disparity.
Using "Scan Reverse" function to rectify mirror image for re ected camera
If you are using a beamsplitter rig you may choose to undo the ipped or opped image in the
camera that shoots the re ection from the mirror. This can be done easily within the XF105 or XF305
by selecting the CUSTOM FUNCTION menu and then the SCAN REVERSE REC submenu.
Before Scan Reverse (notice letters on chart are mirrored)
For example, if your mirror faces down then you will need to select HORIZONTAL.
XF300/305 Whitepaper
Tim Dashwood
Right Camera Clip Title Prefix set to "RE"
After Scan Reverse
Stereoscopic 3D
13