Hitachi 32HDT50 Operating Manual page 15

CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING A STEREO VCR OR STEREO LASERDISC PLAYER
1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the AVC
Center below.
2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
3. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.
4. Press the VID2~VID5 button to view the program from the VCR or laserdisc player. The VIDEO label disappears automatically
after approximately four seconds.
5. Press the ANT button to return to the previous channel.
Rear Panel of AVC Center
S-VIDEO S-VIDEO S-VIDEO
VIDEO VIDEO VIDEO
L
L/(MONO) L/(MONO)
R R R
AUDIO AUDIO AUDIO
MONITOR OUT INPUT 4 INPUT 3
NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is
played back will be abnormal if the connection is loose.
2. A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output
(INPUT: 4 in example on page 22). Refer to your VCR operating guide for more information on line input-output
connections.
TO CONVERTER
ANT B ANT A
Y/VIDEO Y
P P
B B
L/(MONO) L/(MONO)
P P
R R
R R
AUDIO AUDIO
IR BLASTER INPUT 2 INPUT 1
R
ANALOG INPUT
L L/(MONO)
AUDIO
AUDIO
DVI-HDTV
R R
INPUT 1 AUDIO OUT RGB
Back of
VCR
L V
OUTPUT
VCR
15
Please use HITACHI specified cable.
TO MONITOR
AC IN
TruBass SRS and symbol are trademarks of SRS Labs, Inc.