Dual XGPS150 Owner's Manual page 6

Setup
The XGPS150 is very simple to use. There is a
one-time setup process to connect it to your iPad,
iPod, smart phone, tablet or laptop computer.
Once this setup process is completed, simply turn
on the XGPS150 to begin using it.
To setup the XGPS150 with your device, you will
need to do two things:
• Set the mode switch on the XGPS150 for the
type of device you will be using.
• Pair the XGPS150 with the device you will be
using.
Setting the mode switch
With the tip of a fine ballpoint pen, move the mode
switch to the proper position:
• If you are using the XGPS150 with an iPad,
iPod touch or iPhone slide the switch right,
away from the USB connector.
• To use the XGPS150 with an Android, Win-
dows or Blackberry smart phone, laptop com-
puter or tablet, move the mode switch to the left,
towards the USB connector.
6
XGPS150