Table of Contents
Advertisement
BASIC OPERATION (continued)
Input Switching to TV/AV1~4, HDMI, and RGB
By pressing Input Select button, you can switch the input.
To watch actual broadcast, press Input Select button on the control
panel, the numeric buttons or Channel Up / Down button on the
remote control.
To display the image outputting from the external equipments
connected to each terminal (AV1~4, HDMI and RGB), select
corresponding mode.
1. Press Input Select buttons on the remote control.
2.The Input modes can be also switched by using Input Select button
on the control panel.
Each time this button is pressed, the screen displays corresponding
mode by following order.
TV
RGB
3. To directly go back to TV mode, pressing channel Up/Down buttons
on remote control or pressing Program UP/Down on the control
panel.
Also, you can use the numeric buttons on the remote control.
Input Signal Screen Display
The input signal status can be displayed on the screen by pressing the
button of the remote control.
• The display will go out in approximately 5 seconds.
TV
VIDEO
RGB
AV1
AV2
AV3
HDMI
AV4
TV position
1
Name
ABCDE
Sound mode
Input mode
AV1
Composite
Signal mode
Input Mode
RGB
Input horizontal frequency of RGB
H: 48.4 kHz
Input vertical frequency of RGB
V: 60.1 Hz
Input Select
buttons
Channel
UP/DOWN
buttons
Program Down
Input Select
button
`
Program Up
button
RECALL
button
21
Advertisement
Table of Contents
